short cut

Suzhou ShortCut automation equipment Co., Ltd.

tel
Consulting: 0512-6936 0203
这是描述信息
Homepage
/
News
/
Product Encyclopedia
/
Carton forming machine】Carton opening machine purchase must understand the common sense issues

Carton forming machine】Carton opening machine purchase must understand the common sense issues

(Summary description)The efficiency of the unpacking machine is also known as the speed of unpacking. The speed of opening is also known as the efficiency of opening boxes, which is the more concerned about all users, the confirmation of this technical index, will determine the user should choose which opening machine.

1

1

1

1

Carton forming machine】Carton opening machine purchase must understand the common sense issues

(Summary description)The efficiency of the unpacking machine is also known as the speed of unpacking. The speed of opening is also known as the efficiency of opening boxes, which is the more concerned about all users, the confirmation of this technical index, will determine the user should choose which opening machine.

Information

　　

1、The efficiency of the unpacking machine

　　The efficiency of the unpacking machine is also known as the speed of unpacking. The speed of opening boxes is also known as the efficiency of opening boxes, which is a matter of concern to all users, for the confirmation of this technical index, will determine the user should choose which opener.

　　2, the speed of the replacement of cartons

　　In principle, the opener is suitable for the use of the same specifications of the carton, for frequent opening. If the user's carton variety is very much, but the number of open boxes each time is relatively small, this situation, Xiao Carter technical staff do not recommend the user to use the opener, or you can choose to open the number of several cartons, to fully automatic opening, so you can greatly improve the efficiency.

1

　　

3, with other packaging equipment supporting the problem

　　This particular attention, if there is no special clear conditions, because the back end of the opening machine needs to be matched with all the different packaging equipment, of course, the matters that need attention will also vary.

　　These are some common sense issues that customers need to understand before buying an opener, understanding these issues can help us to buy the right opener. Suzhou Xiao Carter specializes in manufacturing various specifications and models of sealing machines, opening machines, according to customer requirements for non-standard custom automatic sealing machine and design of automatic sealing flow packing water line. If you have related needs or product technical problems, you can directly contact Xiao Carter for detailed consultation.
 

Scan the QR code to read on your phone

Previous: What are the advantages of [sealing and packing machine]?
Next: 【Automatic sealing machine】automatic sealing machine chain lubrication points of attention
Previous: What are the advantages of [sealing and packing machine]?
Next: 【Automatic sealing machine】automatic sealing machine chain lubrication points of attention

Related Reading

Related Products
L-shaped vertical up-and-down heat shrink machine
L-shaped vertical up-and-down heat shrink machine
1. This machine is equipped with the most advanced PLC programmable controller, featuring safety protection and alarm devices. The sealing and cutting system can continuously and smoothly perform the sealing action without the need for replacement or maintenance, and the operation is very simple. 2. The L-shaped vertical cutting knife design makes the cutting line straighter and the sealing and cutting effect better. 3. Two sets of horizontal and vertical photoelectric eyes are installed to facilitate switching and selection. For thin or small packages, the sealing packaging operation can be easily completed. 4. Automatic waste material winding, controlled by a separate motor, will not be too loose or too tight and cause tearing. The waste material is easy to disassemble. 5. Automatic waste material winding, controlled by a separate motor, will not be too loose or too tight and cause tearing, and the waste material is easy to disassemble. 6. According to customer requirements, an automatic air blowing function can be added. 7. Front-end power feeding line and rear-end non-powered storage platform can be selected as needed.
50KG Robot Palletizing Machine
50KG Robot Palletizing Machine
Low-load robot palletizing machine, for paper boxes of daily chemical products, small household appliances, and small sports equipment. It can be customized with non-standard grippers according to customer needs, capable of grasping bagged, packaging boxes, canned, boxed, bottled and other products. It uses domestic first-class brand robots, featuring professional modular control systems, stable and reliable performance, and simple operation; the structure is simple, with low failure rate, easy maintenance and repair; the spare parts are few, and the maintenance cost is low.
Box opening and forming cover machine
Box opening and forming cover machine
The automatic unboxing machine is also known as the carton forming machine. The bottom of the box is folded in a certain pattern and sealed with tape before being sent to the packing machine by a dedicated equipment. RPK-40H12 is a vertical unboxing machine, with a speed of 8-12 boxes per minute. It is controlled by Siemens PLC and touch screen, and is easy and quick to operate, with stronger adaptability to cartons. This unboxing machine has been widely used in various industries such as food, medicine, beverages, tobacco, cosmetics, electronics, etc.
I-beam box sealing machine
I-beam box sealing machine
The I-beam box sealing machine consists of a box sealing machine and an L-shaped edge sealing machine. 1. It is a combination of the box sealing machine and the L-shaped edge sealing machine that works in tandem. The standard machine uses a sealing tape for a single line, while the L-shaped edge machine senses the cardboard box and automatically turns it 90 degrees to seal the four corners. 2. It is suitable for batch use of the same specification cardboard boxes at the same time. When changing the specification, the width and height can be manually adjusted. 3. The tape applicator has a precise and sturdy structure, operates smoothly, and has a long service life. 4. Besides the standard specifications, non-standard customization is also acceptable.
I-beam box stacking and palletizing production line
I-beam box stacking and palletizing production line
The robot palletizing machine is more flexible and adaptable, with a faster and more stable palletizing speed. Different fixtures can be designed according to the product, and robots of different tonnage can be selected based on the product weight.
Automatic baler SD-150
Automatic baler SD-150
Technical features. 1、Adopting fully automatic design, which is more convenient to operate and use. 2、The maximum size of the bale is decided by the bow frame, and the bow frame can be customized according to the user's needs 3、Excellent baling tightness, less failure and easy maintenance. 4、Gentle baling action, excellent durability and perfect baling function. 5、Lift cover type panel, easy to maintain 6、New type electric heating device, fast heating and long life. 7、Single chip electric control, full function and easy to operate.
Semi-automatic sealing machine RPB-50 (lower)
Semi-automatic sealing machine RPB-50 (lower)
Machine characteristics. ◆ Suitable for higher and heavy carton use. ◆ Manual adjustment of width and height when changing specifications. ◆ The transmission method is driven by upper and lower belt. ◆ Can be equipped with line or stand-alone operation, manual folding of the top cover, the upper and lower "one" box sealing is completed in one time. ◆ The structure of taping machine is precise and sturdy, with smooth operation and long service life. ◆ Standard specifications, can accept non-standard customization.
Semi-automatic sealing machine RPA-50(on)
Semi-automatic sealing machine RPA-50(on)
Machine characteristics. ◆ Suitable for narrower and lighter cartons. ◆ Manual adjustment of width and height when changing specifications. ◆ The transmission method adopts belt drive on both sides of the lower. ◆ Can be equipped with line or stand-alone operation, manual folding of the top cover, the upper and lower "one" sealing is completed in one time. ◆ The structure of taping machine is precise and sturdy, with smooth operation and long service life. ◆ Standard specifications, can accept non-standard customization.
Automatic "L" type sealing and cutting machine SCA-5545TBG
Automatic "L" type sealing and cutting machine SCA-5545TBG
◆ Packing speed up to 40 packages per minute. ◆ Human-machine interface, just input the length and height of the articles, the system automatically calculates the packing length. ◆ Intelligent design such as multiple options can be stored, so that the packaging size can be changed quickly and easily. ◆ The sealing and cutting knife is treated with special alloy material sprayed with Teflon, which does not stick to the film and seals firmly. ◆ The sealing frame is made of high quality alloy steel, and the frame is not easily deformed. ◆ It has protection function to prevent accidental cutting of packaging and protect the operator's safety.

Please contact us

Contact person: Liu Yi Telephone:0512 - 6936 0203 Mobile:150 5154 2293 Website:www.xktsz.com Address: No. 2 Shuangdeng Road, Suzhou Industrial Park
  • WeChat 【 WeChat 】
  • Mobile site 【 Mobile site 】
Back to top
contact Contact Us
tel +86 0512-6936 0203
phone +86 180 5111 2238
qcode Follow us
qcode
top Back to top
Copyright ©2021 SUZHOU SHORT CUT AUTOMATION EQUIPMENT CO.,LTD. 苏ICP备10218549号 Powered by 300.cnThis site has IPv6 support